BTGSX - STATHANE 811-2 COMPONENT 1
- MSDS: BTGSX
- Manufacturer: EXPANDED RUBBER AND PLASTIC CORP
- Product Name: STATHANE 811-2 COMPONENT 1
- National Stock Number: 9330-00N043482
Product Identification
Product ID:STATHANE 811-2 COMPONENT 1
MSDS Date:03/08/1993
FSC:9330
NIIN:00N043482
Kit Part:Y
MSDS Number: BTGSX
Responsible Party
GARDENA, CA 90249
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 213-321-4360
Cage: 25598
Contractor
Telephone: 310-321-4260
Cage: 25598
Ingredients
ISOCYANIC ACID, METHYL-M-PHENYLENE ESTER; (TOLUENE
CAS: 26471-62-5
RTECS: NQ9490000
Fraction By Weight: >70%
OSHA PEL 0.005 PPM (MFR)
ACGIH TLV: 0.005 PPM (MFR)
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
POLYESTER POLYOL
Fraction By Weight: <30%
OSHA PEL N/K
ACGIH TLV: N/K
BENZOYL CHLORIDE (SARA III)
CAS: 98-88-4
RTECS: DM6600000
Fraction By Weight: <15%
OSHA PEL N/K
ACGIH TLV: N/K
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:VAPOR INHALATION MAY CAUSE SEVERE
IRRITATION OF RESPIRATORY TRACT. PROLONGED EXPOSURE MAY CAUSE
PULMONARY EDEMA & CHRONIC LUNG IMPAIRMENT. LIQUID CONTACT CAUSES
SERIOUS SKIN & EYE BURNS.
Explanation of Carcinogenicity:TOLUENE DIISOCYANATE (2,4)/(2,6): IARC
MONOGRAPHS, SUPPLEMENT, VOL 7, PG 56, 1987:GROUP 2B. NTP 6TH ANNUAL
RPT (SUP DAT)
Effects of Overexposure:DIFFICULT & LABORED BREATHING, ASTHMA-LIKE
ATTACKS IN SENSITIVE PERSONS, SEVERE IRRITATION OF SKIN, EYE DAMAGE
OR TDI SENSITIZATION.
Medical Cond Aggravated by Exposure:RESPIRATORY & BRONCHIAL CONDITIONS.
SKIN SENSITIVITY.
First Aid
First Aid:EYES:FLUSH W/WATER FOR AT LEAST 15 MINS. GET MEDICAL
ATTENTION. SKIN:WASH W/PLENTY OF SOAP & WATER. REMOVE CONTAMINATED
CLOTHING. INGEST:GIVE PLENTY OF WATER. DO NOT INDUCE VOMITING. GET
MEDICAL ATTEN TION. INHAL:MOVE TO FRESH AIR. GIVE OXYGEN IF
NECESSARY. GET MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:PMCC
Flash Point:260F,127C
Lower Limits:0.9%
Upper Limits:9.5%
Extinguishing Media:WATER, FOAM, CARBON DIOXIDE OR FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . COOL DOWN CLOSED CONTAINERS W/WATER SPRAY.
Unusual Fire/Explosion Hazard:OXIDES OF CARBON, NITROGEN, ISOCYANATE
VAPS & HCN WILL BE GENERATED. WATER CONTAMD MATL WILL GENERATE CO2
WHICH MAY CAUSE EXPLOS RUPTURE OF CLSD (SUP DAT)
Accidental Release
Spill Release Procedures:CLEAN UP CREW MUST WEAR FULL PROTECTIVE
EQUIPMENT. ABSORB MATERIAL W/SAWDUST OR SWEEPING COMPOUND.
DECONTAMINATE W/ MIXTURE OF 90% WATER, 8% CONCENTRATED AMMONIA & 2%
DETERGENT. SHOVEL IT INTO OPEN TO P DRUMS & REMOVE TO WELL
VENTILATED AREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN TIGHTLY CLOSED CONTAINERS IN
DRY, COOL PLACES AT TEMPERATURES BETWEEN 70F-90F.
Other Precautions:PRODUCT REACTS W/WATER & OTHER SUBSTANCES GENERATING
CO2 GAS WHICH WILL CAUSE SEALED CONTRS TO EXPAND & POSS RUPTURE. DO
NOT RESEAL CONTRS IF CONTAM IS SUSPECTED. EXPOS TO VAPORS OF HOT
MATERIAL CAN B E EXTREMELY DANGEROUS.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED SCBA, GAS MASK EQUIPPED W/
ORGANIC CARTRIDGES OR MASKS W/EXTERNAL AIR SOURCES.
Ventilation:LOCAL EXHST & MECHANICAL (GENERAL) RECOMMENDED. SPECIAL:TDI
VAPORS ARE HVR THAN AIR. DESIGN EXHST SYSTEMS ACCORDINGLY.
Protective Gloves:CHEM RESIST RUBBER OR PLASTIC GLOVES.
Eye Protection:ANSI APPRVD CHEM SFTY GOG/FULL FSHLD FPN
Other Protective Equipment:COVERALLS, BOOTS & RUBBER APRONS. ANSI
APPRVD EMERGENCY EYEWASH & DELUGE SHOWER .
Work Hygienic Practices:DO NOT EAT, DRINK OR SMOKE IN WORKING AREAS.
KEEP CLOTHING CLEAN & EQUIPMENT CLEAN AT ALL TIMES.
Supplemental Safety and Health
KEY1;T3.SOL IN H2O:REACTS W/WATER, GENERATING CO2. EXPLO HAZ:CONTAINERS
WHEN EXPOSED TO FIRE CONDITIONS. EXPLAN OF CARCIN:ON CARCINOGENS,
1991:ANTICIPATED TO BE CARCINOGEN.
Chemical Properties
HCC:T3
Boiling Pt:B.P. Text:480F,249C
Vapor Pres:0.01 @ 68F
Vapor Density:6
Spec Gravity:1.2 (H2O=1)
Evaporation Rate & Reference:<0.01 (BUTYL ACETATE=1)
Solubility in Water:SUPP DATA
Appearance and Odor:LIGHT YELLOW, MEDIUM VISCOSITY LIQUID; STRONG
PUNGENT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
BASIC COMPOUNDS, CAUSTIC SODA, TERTIARY AMINES & WATER.
Stability Condition to Avoid:TEMPERATURES ABOVE 40C FOR EXTENDED
PERIODS OF TIME.
Hazardous Decomposition Products:ISOCYANATE VAPORS, OXIDES OF CARBON &
NITROGEN & HCN.
Conditions to Avoid Polymerization:WATER & OTHER PRODUCTS THAT REACT W/
ISOCYANATES.
Disposal
Waste Disposal Methods:DISPOSAL OF WASTE MUST BE DONE IN ACCORDANCE W/
FEDERAL, STATE & LOCAL ENVIRONMENTAL CONTROL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.